Pick your deck board. Get the CAMO system that's right for you.

Hardwood

When you’re installing beautiful hardwood such as Ipé, Tigerwood, Cumaru, and Bangkirai, you want a fastener that will hold up, and that’s easy to install. Use CAMO PRO guides and edge decking screw for a fastener-free surface, or the Premium decking screw for traditional installation. Use the CAMO pre-drill bit when installing hardwood and the special drive bit (item 345089) when installing 34mm thick decking boards.

Always check what recommendations your deck-board supplier has for your board and follow local building standards for your specific application.

Products used with this material

Edge Deck Screws

Pair the patented rake tip screws with a Pro Series Guide to install a fastener-free surface easily and affordably.

See product>>

Premium Deck Screws

For a traditional look, use premium deck screws that draw the board tightly to the joist.

See product>>

Pro Guide

The Pro Guide clamps to the board and creates a 3/16” (5mm) gap while guiding two CAMO Edge deck screws into the side of the board.

See product>>

Pro-X1 Guide

The Pro-X1 Guide clamps boards and creates a 1/16” (1.6 mm) gap while guiding two CAMO Edge deck screws into the side of the board.

See product>>

Pro-NB Guide

For use when installing any narrow board—treated lumber, cedar, hardwood, composite, and PVC

See product>>

Edge Deck Screw Driver Bits

For use with Pro Series Guides and Edge deck screws.

See product>>

Pre-Drill Bit

Use the Pre-Drill bit to drill a hole before fastening hardwood boards with Stainless Steel Edge deck screws.

See product>>

Build SMARTER, build faster.

CAMO products are easy to use, easy to learn, and usable on any deck—so you can get the job done and move on.

GET CAMO