Pick your deck board. Get the CAMO system that's right for you.

Redwood

CAMO Edge fastening is the best way to install redwood decking. CAMO tools deliver Edge deck screws into the side of the board, which means no splitting or cracking boards, just a strong-holding screw, and a fastener-free surface. Or use the Premium deck screws, if you desire a traditional face-fastened deck. Use the CAMO pre-drill bit when installing redwood and the special drive bit (item 345089) when installing 34mm thick decking boards.

Always check what recommendations your deck-board supplier has for your board. 

Products used with this material

Edge Deck Screws

Pair the patented rake tip screws with a Pro Series Guide to install a fastener-free surface easily and affordably.

See product>>

Premium Deck Screws

For a traditional look, use premium deck screws that draw the board tightly to the joist.

See product>>

Pro Guide

The Pro Guide clamps to the board and creates a 3/16” (5mm) gap while guiding two CAMO Edge deck screws into the side of the board.

See product>>

Pro-X1 Guide

The Pro-X1 Guide clamps boards and creates a 1/16” (1.6 mm) gap while guiding two CAMO Edge deck screws into the side of the board.

See product>>

Pro-NB Guide

For use when installing any narrow board—treated lumber, cedar, hardwood, composite, and PVC

See product>>

Edge Deck Screw Driver Bits

For use with Pro Series Guides and Edge deck screws.

See product>>

Pre-Drill Bit

Use the Pre-Drill bit to drill a hole before fastening hardwood boards with Stainless Steel Edge deck screws.

See product>>

Build SMARTER, build faster.

CAMO products are easy to use, easy to learn, and usable on any deck—so you can get the job done and move on.

GET CAMO