Pick your deck board. Get the CAMO system that's right for you.

Square Edge Synthetics

When you are installing square edge synthetics such as square edge composite, capped composite, or PVC deck boards, the CAMO Pro guides and Edge deck screws help you achieve a fastener-free surface. Use the CAMO pre-drill bit when installing square edge synthetics and the special drive bit (item 345089) when installing 34mm thick decking boards.

Always check what recommendations your deck-board supplier has for your board. 

Products used with this material

Edge Deck Screws

Pair the patented rake tip screws with a Pro Series Guide to install a fastener-free surface easily and affordably.

See product>>

Premium Deck Screws

For a traditional look, use premium deck screws that draw the board tightly to the joist.

See product>>

Pro Guide

The Pro Guide clamps to the board and creates a 3/16” (5mm) gap while guiding two CAMO Edge deck screws into the side of the board.

See product>>

Pro-X1 Guide

The Pro-X1 Guide clamps boards and creates a 1/16” (1.6 mm) gap while guiding two CAMO Edge deck screws into the side of the board.

See product>>

Pro-NB Guide

For use when installing any narrow board—treated lumber, cedar, hardwood, composite, and PVC

See product>>

Edge Deck Screw Driver Bits

For use with Pro Series Guides and Edge deck screws.

See product>>

Pre-Drill Bit

Use the Pre-Drill bit to drill a hole before fastening hardwood boards with Stainless Steel Edge deck screws.

See product>>

Build SMARTER, build faster.

CAMO products are easy to use, easy to learn, and usable on any deck—so you can get the job done and move on.

GET CAMO