Pick your deck board. Get the CAMO system that's right for you.
Cedar
Reduce the potential for splintering by using CAMO tools and acid-proof stainless steel A4 Edge deck screws to secure cedar deck boards. CAMO Edge deck screws feature a rake tip that augers material out, and they’re fastened through the edge of the board, leaving a fastener-free, split-free surface. Or use the Premium deck screws, if you desire a traditional face-fastened deck. Use the CAMO pre-drill bit when installing cedar and the special drive bit (item 345089) when installing 34mm thick decking boards.
Always check what recommendations your deck-board supplier has for your board
Products used with this material
Edge Deck Screws
Pair the patented rake tip screws with a Pro Series Guide to install a fastener-free surface easily and affordably.
See product>>
Premium Deck Screws
For a traditional look, use premium deck screws that draw the board tightly to the joist.
See product>>
Pro Guide
The Pro Guide clamps to the board and creates a 3/16” (5mm) gap while guiding two CAMO Edge deck screws into the side of the board.
See product>>
Pro-X1 Guide
The Pro-X1 Guide clamps boards and creates a 1/16” (1.6 mm) gap while guiding two CAMO Edge deck screws into the side of the board.
See product>>
Pro-NB Guide
For use when installing any narrow board—treated lumber, cedar, hardwood, composite, and PVC
See product>>
Pre-Drill Bit
Use the Pre-Drill bit to drill a hole before fastening hardwood boards with Stainless Steel Edge deck screws.
See product>>Build SMARTER, build faster.
CAMO products are easy to use, easy to learn, and usable on any deck—so you can get the job done and move on.
GET CAMO